Help wanted by new guy please.

General Forum to discuss anything you like. No religious topics please.
Post Reply
David Girling
Fireman
Posts: 19
Joined: Fri Nov 09, 2018 7:57 pm
Location: Ipswich

Help wanted by new guy please.

Post by David Girling » Sun Nov 18, 2018 12:03 am

Would anybody be able to help me with the third article by Peter Smallwood in Turnout No.22 for building the LMS Large Cattle Wagon. As I only recently joined the GL5 Society I do not yet have a complete set of backnumbers and am missing no.22. If someone could possibly photocopy the said article for me I will be happy to re-imburse you for all costs involved.
Many thanks for your help in advance.
Best wishes.
David
Admin
Site Admin
Posts: 59
Joined: Mon Jan 09, 2006 4:47 pm

Re: Help wanted by new guy please.

Post by Admin » Sun Nov 18, 2018 1:44 pm

Hi David, and welcome to GL5.

LIz, our membership secretary, keeps the back numbers and should be able to help, though I think she's on holiday for the next week or so.
David Girling
Fireman
Posts: 19
Joined: Fri Nov 09, 2018 7:57 pm
Location: Ipswich

Re: Help wanted by new guy please.

Post by David Girling » Sun Nov 18, 2018 2:47 pm

Thanks for the reply Admin but I have already bought half of the total run of backnumbers from Liz.Unfortunately No.22 was not amongst them, hence my request on here.
Regards
David
Admin
Site Admin
Posts: 59
Joined: Mon Jan 09, 2006 4:47 pm

Re: Help wanted by new guy please.

Post by Admin » Mon Nov 19, 2018 6:21 pm

Ooops, sorry.
PM me your address, and I'll get it copied next week for you.
Dave.
David Girling
Fireman
Posts: 19
Joined: Fri Nov 09, 2018 7:57 pm
Location: Ipswich

Re: Help wanted by new guy please.

Post by David Girling » Sat Nov 24, 2018 6:38 pm

Many thanks for the copy of the article Dave. I did not expect there to be so much info in the third article, It will be most useful. Please let me know how I can re-imburse you for your trouble.
Best wishes
David
Admin
Site Admin
Posts: 59
Joined: Mon Jan 09, 2006 4:47 pm

Re: Help wanted by new guy please.

Post by Admin » Sun Nov 25, 2018 12:04 am

You're most welcome. Make sure to bring the finished model along to one of our events, and you can buy me a pint!
Dave.
Post Reply