Page 1 of 1

Radio control for signals

Posted: Mon Jul 05, 2021 8:17 pm
by Ben Lyons
Hello all , I've been asked by SH to see if anyone has used RC to operate both signals and turnouts.
The idea is that there should be a signal box not fixed but removable for storage.
The box would hold the transmission system. Operation would be by toggle switches for each signal or turnout, the toggle would then operate the sender , like the switch on the top of a standard Rc unit. There could be up to 30 different signals,turnouts to control. Each signal or turnout would have it own battery to provide power to both the receiver and to the actuator.
So to all you RC members anyone up to helping with the idea.
Thanks