Lamps reloaded...

A forum dedicated to workshop projects
Post Reply
User avatar
Scrat
Fat Controller
Posts: 99
Joined: Fri Feb 11, 2011 4:18 pm

Lamps reloaded...

Post by Scrat » Tue Jan 31, 2012 6:42 pm

Hi Folks,

As the Super Claud is approaching the finish line, I still have no idea which kind of headlamps I need.
Can you help? I will fit a battery box between the frames in front of the smokebox saddle. There´s plenty of space. During my research on the web I found several different versions of a headlamp code. Which one do I use?

Image

The same problem applies to my LBSC Minx. Which type of lamps is the right one for that loco?

Image

Best regards

Holger
User avatar
richardw
Engine Driver
Posts: 37
Joined: Sat Feb 21, 2009 10:56 am
Location: York

Re: Lamps reloaded...

Post by richardw » Tue Jan 31, 2012 7:29 pm

Holger

In both cases you could use headcode discs in place of lamps until you have time to make/source the correct lamps as both the Great Eastern and Southern used discs in daylight. I have recently made some for my B2 of the slightly later LNER style, I'll post a photo later in the week when I have more time.

For GER Headcodes you could read up at http://www.gersociety.org.uk/index.php? ... &Itemid=53
and http://www.gersociety.org.uk/index.php? ... &Itemid=54

Regards
Richard
User avatar
Scrat
Fat Controller
Posts: 99
Joined: Fri Feb 11, 2011 4:18 pm

Re: Lamps reloaded...

Post by Scrat » Sun Apr 15, 2012 5:56 pm

Can anyone give me a sketch/dimensions of the necessary lamp irons for the Claud?
Did any Claud carry headboards?
How are these mounted?

Best regards

Scrat
mikeg
Engine Driver
Posts: 26
Joined: Mon Sep 08, 2008 7:46 pm
Location: essex

Re: Lamps reloaded...

Post by mikeg » Mon Apr 16, 2012 8:07 pm

Scrat - Suggest in the case of the Super Claud you look either at the series of articles in Model Engineer 1942 or contact the GE Society

The Minx being Southern should have discs by day and lamps at night however this was to the Southern (and BR(S) system of Route identification NOT what type of train was on behind the loco.

I did an article in Turnout that might help.

I think its been discussed before here on the forum somewhere but you are aware that no Super Claud was painted blue ? - nice colour that it was
User avatar
Scrat
Fat Controller
Posts: 99
Joined: Fri Feb 11, 2011 4:18 pm

Re: Lamps reloaded...

Post by Scrat » Mon Apr 16, 2012 9:40 pm

Hi Mike,

thanks for the info. I do not have any Turnout older than 2011. Of course I know that no Super Claud was blue but I have seen several models of blue Super Clauds (last one at antiquesteam.co.uk) and I liked the colour. The Claud Hamilton was blue, so my version is a kind of "what if one Claud had made it into preservation".

Just like the locos I mentioned here:
http://gl5.org/forum/viewtopic.php?f=1&t=189


The loco is about finished........i thought, but last Saturday at Klein Vollbüttel it did not move for a single inch. I guess one of the slide valves has come loose. Last time it ran flawlessly for a whole day.

Best regards

Scrat
John Gay
No rank
Posts: 1
Joined: Thu Nov 29, 2018 8:24 am

Re: Lamps reloaded...

Post by John Gay » Sat Sep 12, 2020 9:02 am

Scrat wrote:
Tue Jan 31, 2012 6:42 pm
Hi Folks,

As the Super Claud is approaching the finish line, I still have no idea which kind of headlamps I need.
Can you help? I will fit a battery box between the frames in front of the smokebox saddle. There´s plenty of space. During my research on the web I found several different versions of a headlamp code. Which one do I use?

Image

The same problem applies to my LBSC Minx. Which type of lamps is the right one for that loco?

Image

Best regards

Holger
Sorry but can I see more of the Glaskasten please 😁
User avatar
Scrat
Fat Controller
Posts: 99
Joined: Fri Feb 11, 2011 4:18 pm

Re: Lamps reloaded...

Post by Scrat » Sun Sep 13, 2020 12:30 pm

Hi John,

PM me your email address.
I do not want to disturb others discussing German locos here.
Post Reply